1/1
ATV
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Imprimé au Canada / Printed in Canada
2810405-30E
A-2810405-30E
OFFSET ANTI-ROTATION ARM BRACKET KIT
Kimpex
#
375120
For Commander WIDE TRACK and WTX Track Kits
MOUNTING INSTRUCTIONS
1
Ref. Description
Item No.
Qty
a
Rear right anti-rotation
arm bracket (WTX)
2810405-3-3000 1
Rear left anti-rotation
arm bracket (WTX)
2810405-4-1000 1
b
3/8" nc X 3-3/4" hex bolt
S1711-00630-052 2
c
3/8 " dia flat washer
S4614-00600-082 2
d
3/8" nc nut
S4186-10600-022 2
e
1/2" nc X 6-1/2" hex bolt
S1711-00852-052 4
NOTE: The installation can be previously made in all
time on the vehicle. Only two rear track systems
are concerned.
NOTE: The wheels have not been showned for clearer
views. They do not have to be removed to
perform this installation.
1)
Remove the wheel caps (#
B
). Remove the existing bolts
(#
A
), nuts (#
D
), and flat washers (#
C
).
2)
Install the
(2) 1/2" nc X 6-1/2"
hex bolts
e
instead of the two
bolts removed in the previous step.
3)
Position the anti-rotation arm bracket
a
over the hex
bolts
e
and fasten using the flat washers and nuts
removed in
step 1
.
4)
Complete the assembly with the
3/8" nc X 3-3/4"
hex bolt
b
,
the
3/8" dia
flat washer
c
, and the
3/8" nc
nut
d
.
NOTE : Refer to the Track Kit manual for torque
specifications and complete the installation.
