2810324
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810324 Rév. A
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375117
FOR " COMMANDER WIDE TRACK " AND " COMMANDER TREK " / BRP OUTLANDER, OUTLANDER MAX
(see sketch M)
6)
Fasten the other end of the rear anti-rotation arm (#
9
) onto the
mount plate (#
8
) installed in the
“MOUNT PLATE
INSTALLATION” section
using a
3/8” nc X 1-1/2”
hex bolt (#
13
),
a
3/8” dia
flat washer (#
20
), a
.3965” I.D. X 9/16” O.D. X .44”
tightening
spacer (#
11
), and a
3/8” nc
self-locking nut (#
17
).
(see sketch N)
7)
Install the rubber bushing (#
1
), the
3/4” I.D. X 2” O.D. X 1/8”
flat
washer (#
21
), and the other rubber bushing (#
1
) over the
bushing spacer tube (#
2
).
8)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
22
) onto the
threaded part of the anti-rotation arm (#
9
).
9)
Screw the
5/8” nc
self-locking nut (#
18
) onto the threaded part of
the anti-rotation arm (#
9
). Do not overtighten.
NOTE:
Refer to the Track Kit manual for the correct
adjustment.
10)
Repeat
steps 1
to
9
for the opposite side.
sketch M
sketch N
RIGHT
REAR VIEW
RIGHT
REAR VIEW
Rear of
the ATV
Rear of
the ATV
8/9
