10/11
ATV
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
2810413
A-2810413 Rev. A
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
#
375229
For Commander Wide Track, WTX, and TREX Track Kits
MOUNTING INSTRUCTIONS
10
COMMANDER WIDE TRACK AND WTX
REAR ANTI-ROTATION INSTALLATION
(see sketch J)
1)
Assemble the free extremity of the rear anti-rotation
(#
2
) to the hole made for this purpose in the plastic
frame of the Track Kit using the
3/8” nc X 6”
hex bolt
(#
6
), the
3/8” dia
flat washer (#
7
), the tightening spacer
(#
3
), the anti-rotation shim 2" (#
18
), the
(2) 3/8” I.D. X
1-1/4” O.D. X .120”
Fender washers (#
13
), and the
3/8” nc
self-locking nut (#
12
).
Apply a tightening torque of 23 ft-lbs.
2)
Repeat
step 1
for the opposite side.
NOTE:
Refer to the Track Kit manual to complete
the installation.
COMMANDER TREX
REAR ANTI-ROTATION INSTALLATION
(see sketch K)
1)
Assemble the free extremity of the rear anti-rotation
(#
2
) to the hole made for this purpose in the frame of
the Track Kit using the
3/8” nc X 3-1/2”
hex bolt (#
16
), the
3/8” dia
lock washer (#
17
), the
3/8” dia
flat washer (#
7
),
the tightening spacer (#
3
), and the anti-rotation shim
2" (#
18
).
Apply a tightening torque of 23 ft-lbs.
2)
Repeat
step 1
for the opposite side.
NOTE:
Refer to the Track Kit manual to complete
the installation.
sketch J
LEFT
REAR VIEW
Front of the ATV
sketch K
LEFT
REAR VIEW
Front of the ATV
