7/7
ATV
INSTALLATION MANUAL
ANTI-ROTATION ARMS KIT
KIMPEX N
°
375930
FOR COMMANDER TREX TRACK KIT. BRP OUTLANDER
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain (New York) / 12919
2810490-20
•
A-2810490-20-EN
•
Lithographié au Canada / Litho’d in Canada
7
Commander TREX Installation of the rear anti-rotation arm onto the mount plate
1) Faster the other end of the rear anti-rotation arm
05
onto mount plate, already installed, using the hex bolt
08
, one
(1) flat washer
12
, the tightening spacer
06
, the neoprene flat washer
04
, the other flat washer
12
and the nut
10
. See
Figure 5
IMPORTANT:
The neoprene flat washer
04
must be installed between the anti-rotation arm
05
and the mount plate.
2) Repeat
step 1
for the opposite side
Fig. 5
Rear of
The ATV
