2810294
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810294 Rév. A
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375116
FOR " COMMANDER WIDE TRACK " AND " COMMANDER TREK " / BRP RENEGADE
9)
Repeat
steps 1
to
8
for the opposite side.
6)
Apply one drop of thread locker (supplied) on the free end of
the rear anti-rotation tube (#
5
) 5/8” nc threads. Screw
completely the spring adapter (#
7
) while retaining the
5/8” nc
nut (#
22
) to keep the correct adjustment.
Use a 9/16” open-wrench and a 15/16” open-wrench to
accomplish this task (
see sketch M
).
7)
Apply one drop of thread locker (supplied) on the
1⁄2” nf X 1-1/2
hex bolt (#
21
).
8)
Install the anti-rotation spring (#
3
) using the spring support (#
1
)
and the
1⁄2 nf X 1-1/2”
bolt (#
21
) (
see sketch M
).
5)
Adjust the
5/8” nc
nut (#
22
) so that the
17mm I.D. X 50mm O.D. X
3mm
flat washer (#
27
) and the 5 spacers (U.H.M.W.) (#
8
) are
sitting on the A-arm bracket (#
14
) while keeping the rear track
flat on the ground with the small wheels (5.66” dia) in firm
contact with the ground (
see sketch L
).
sketch K
sketch L
Horizontal
sketch M
LEFT REAR VIEW
LEFT REAR VIEW
LEFT REAR VIEW
Rear of
the ATV
Rear of
the ATV
Rear of
the ATV
8/10
