KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810323 Rév. A
2810323
11/11
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375417
For "Commander Wide Track" and "Commander Trek" track kit
2009-2010 Polaris Sportsman XP
“COMMANDER WIDE TRACK”
REAR ANTI-ROTATION INSTALLATION
(see sketch N)
1)
Assemble the free extremity of the rear anti-rotation
(#
4
) to the hole made for this purpose in the plastic
frame of the Track Kit using the
3/8” nc X 3-1/2”
hex bolt
(#
11
), the
3/8” dia
flat washer (#
18
), the tightening
spacer (#
1
), the
(2) 3/8” I.D. X 1-1/4” O.D. X .120”
Fender
washers (#
21
), and the
3/8” nc
self-locking nut (#
15
).
Apply a tightening torque of 23 ft-lbs.
2)
Repeat
step 1
for the opposite side.
NOTE :
Refer to the track kit manual to
complete the installation.
“COMMANDER TREK”
REAR ANTI-ROTATION INSTALLATION
(see sketch O)
1)
Assemble the free extremity of the rear anti-rotation
(#
4
) to the hole made for this purpose in the frame of
the Track Kit using the
3/8” nc X 1”
hex bolt (#
10
), the
3/8” dia
lock washer (#
17
), the
3/8” dia
flat washer (#
18
),
and the tightening spacer (#
1
).
Apply a tightening torque of 23 ft-lbs.
2)
Repeat
step 1
for the opposite side.
NOTE :
Refer to the track kit manual to
complete the installation
sketch N
LEFT
REAR VIEW
Front of the ATV
sketch O
LEFT
REAR VIEW
Front of the ATV
