KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810260
2810260
10/11
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375415
For "Commander Wide Track" and "Commander Trek" track kit
Polaris Sportsman X2 touring
REAR ANTI-ROTATION INSTALLATION
(see sketch J)
1)
Screw the
5/8” nc
nut (#
15
) onto the threaded part of the anti-rotation tube (#
8
).
2)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
11
) and the bushing spacer tube (#
10
) onto the threaded part of the anti-rotation
tube (#
8
).
3)
Install the rubber bushing (#
17
) over the bushing spacer tube (#
10
).
4)
Slide the anti-rotation assembly into the hole on the bottom of the rear A-arm bracket (#
1
).
5)
Install the rubber bushing (#
17
), the
3/4” I.D. X 2” O.D. X 1/8”
flat washer (#
16
), and the other rubber bushing (#
17
) over the bushing spacer
tube (#
10
).
6)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
11
) onto the threaded part of the anti-rotation tube (#
8
) and screw the
5/8” nc
self-
locking nut (#
14
) onto the threaded part of the anti-rotation tube (#
8
). Do not overtighten.
NOTE :
Refer to the Track Kit manual for the correct adjustment.
7)
Reinstall the rear CV shield removed during
step 2 of the “REAR A-ARM BRACKET INSTALLATION” section
using the original
hardware.
8)
Repeat
steps 1
to
7
for the opposite side.
sketch J
LEFT
REAR VIEW
Rear of
the ATV
