KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810320 Rév. B
2810320
6/8
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375318
For "Commander Wide Track" and "Commander Trek" track kit
Kawasaki brute force KVF 750
FRONT ANTI-ROTATION INSTALLATION
(see sketch F)
NOTE :
Pay special attention to the orientation given to
spacers (#3 and #4) during installation.
1)
Assemble the ball joint (#
18
) and the
1/2” nf
nut (#
17
) to the
front anti-rotation assembly (#
11
)
.
2)
Install the large ball joint spacer (#
4
) with the narrow part facing
down onto the
1/2” nc X 2-1/2”
carriage bolt (#
9
) installed in
step
3 of the “FRONT A-ARM BRACKET INSTALLATION”
section.
3)
Install the ball joint of the front anti-rotation assembly (#
11
) onto
the bolt (#
9
), below the large ball joint spacer (#
4
). Install the
short ball joint spacer (#
3
) with the narrow part facing up,
below the anti-rotation assembly (#
11
).
4)
Tighten the assembly with the
1/2” nc
self-locking nut (#
8
).
Torque to 55 ft-lbs.
WARNING :
If the bolts are not sufficiently tightened,
there is a risk of them becoming loose, of parts detaching
and risk of loss of control over the vehicle, as well as risk
of personal injury.
5)
Rotate the anti-rotation assembly (#
11
) towards the center of
the ATV to prevent it from interfering with the installation of the
track kit.
NOTE :
Refer to the track kit manual for the correct
adjustment.
6)
Repeat
steps 1
to
5
for the opposite side.
MAIN AXLE SHIMS INSTALLATION
(see sketch G)
1)
Remove the original wheel studs from the hub of the ATV.
2)
Insert the
(4) M10 X 35mm
wheel studs (#
15
) and position the
(4)
shims (#
14
) onto the hub of the ATV.
3)
Install the Track Kit onto the hub of the ATV using the
(4) M10
wheel nuts (#
16
). Torque to 25 ft-lbs.
NOTE :
Recheck torque of the wheel nuts (#16) after
one hour of use.
4)
Repeat
steps 1
to
3
for the opposite side.
sketch F
sketch G
LEFT
FRONT VIEW
Front of the ATV