KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810253
2810253
9/9
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375317
For "Commander Wide Track" and "Commander Trek" track kit
Kawasaki brute force KVF 750
REAR ANTI-ROTATION INSTALLATION
(see sketch J)
1)
Screw the
5/8” nc
nut (#
10
) onto the threaded part of the anti-rotation tube (#
3
).
2)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
6
) and the bushing spacer tube (#
5
) onto the threaded part of the anti-rotation
tube (#
3
).
3)
Install the rubber bushing (#
12
) over the bushing spacer tube (#
5
).
4)
Slide the anti-rotation assembly into the hole on the bottom of the rear A-arm bracket (#
1
).
5)
Install the rubber bushing (#
12
), the
3/4” I.D. X 2” O.D. X 1/8”
flat washer (#
11
), and the other rubber bushing (#
12
) over the bushing spacer
tube (#
5
).
6)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
6
) onto the threaded part of the anti-rotation tube (#
3
).
7)
Screw the
5/8” nc
self-locking nut (#
9
) onto the threaded part of the anti-rotation tube (#
3
). Do not overtighten.
NOTE :
Refer to the track kit manual for the correct adjustment.
8)
Repeat
steps 1
to
7
for the opposite side.
NOTE :
Under extreme conditions of use of the Track Kit, it is possible that the tracks come into contact with the plastics
of the vehicle.
sketch J
LEFT
REAR VIEW
Rear of the ATV
