10/12
ATV
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
2810417
A-2810417
ENSEMBLE DE SOUS-TABLES AVANT ET ARRIÈRE
Kimpex
#
375230
Pour ensembles de chenilles «Commander Wide Track» et «Commander Trek»
MOUNTING INSTRUCTIONS
10
(see sketch M)
5)
Fasten the other end of the rear anti-rotation arm (#
4
) onto the
rear anti-rotation arm support (#
5
) installed in
step 1 at the
“SNOWPLOW ADAPTER INSTALLATION”
using the
3/8” nc X 3”
hex bolt (#
11
) and the
3/8” nc
nylock nut (#
15
).
IMPORTANT :
Make sure to use the correct mounting
hole when you assemble the rear anti-rotation arm (#4)
to the rear anti-rotation arm support (#5) (see sketch M).
(see sketch N)
6)
Install the rubber bushing (#
1
), the
3/4” I.D. X 2” O.D. X 1/8”
flat
washer (#
17
), and the other rubber bushing (#
1
) over the
bushing spacer tube (#
2
).
7)
Install the
17mm I.D. X 50mm O.D. X 3mm
flat washer (#
18
) onto the
threaded part of the anti-rotation arm (#
4
).
8)
Screw the
5/8” nc
self-locking nut (#
16
) onto the threaded part
of the anti-rotation arm (#
4
). Do not overtighten.
NOTE :
Refer to the Track Kit manual to complete the
installation.
9)
Repeat
steps 1
to
8
for the opposite side.
sketch N
RIGHT
REAR VIEW
Rear of
the ATV
sketch M
RIGHT
REAR VIEW
Rear of
the ATV
MOUNTING
HOLE
