2810264
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810264 Rév. A
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375215
FOR " COMMANDER WIDE TRACK " AND " COMMANDER TREK " / HONDA FOREMAN 450ES
SNOWPLOW ADAPTER INSTALLATION
(see sketch F)
WARNING :
Prior to installation, turn off the engine, put
in two-wheel driving mode, and block the wheels.
WARNING :
When the ATV is raised, make sure that it is
properly secured/supported to prevent it from
accidentally falling during the installation. If not properly
secured/supported, serious physical injury could occur.
1)
Fasten the snowplow adapter extension (#
4
) onto the adapter
(#
21
) using the
(4) 3/8” nc X 1”
hex bolts (#
11
) and the
(4) 3/8” nc
self-locking nuts (#
16
).
(see sketch G)
2)
Fasten the
(2)
rear anti-rotation arm supports (#
5
) onto the
snowplow adapter extension (#
4
) using
(6) 3/8” nc X 1”
hex bolts
(#
11
) and
(6) 3/8” nc
self-locking nuts (#
16
).
NOTE :
Refer to the snowplow adapter mounting
instructions (no. 073221) to finish the installation.
t
TO FINISH THE INSTALLATION OF “COMMANDER
WIDE TRACK” MODELS, SEE PAGES 9 AND 10.
t
TO FINISH THE INSTALLATION OF “COMMANDER
TREK” MODELS, SEE PAGES 11 AND 12.
sketch F
sketch G
7/11
