2810255
KIMPEX INC.
/ 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA
/ 100 Walnut Street / Champlain, New York / 12919
Lithographié au Canada / Litho’d in Canada
A-2810255 Rév. B
ATV
MOUNTING INSTRUCTIONS
FRONT AND REAR A-ARM BRACKET KIT
Kimpex
# 375214
FOR " COMMANDER WIDE TRACK " AND " COMMANDER TREK " / HONDA FOREMAN 2006
“COMMANDER WIDE TRACK” / REAR ANTI-ROTATION ARM BRACKET INSTALLATION
(see sketch H)
1)
Unscrew the self-locking nut (#
A
) from the 1/2” nc X 6” hex bolt (#
B
) retaining the wheel closer to the adjustment slide (#
C
). Remove
and discard the flat washer (#
D
).
(see sketch I)
2)
Assemble the rear right anti-rotation arm bracket (#
7
) to the hole made for this purpose in the plastic frame of the Track Kit using
(3) 3/8” nc X 3-1/2”
hex bolts (#
13
), a
3/8” I.D. X 1-1/4” O.D. X .120”
Fender washer (#
22
), the rear anti-rotation arm clamping plate (#
9
),
(3) 3/8” nc
self-locking nuts (#
18
), and the original self-locking nut (#
A
) removed in
step 1
.
3)
Repeat
steps 1
and
2
for the opposite side.
“COMMANDER WIDE TRACK” /
MAIN AXLE ADAPTER INSTALLATION
(see sketch J)
1)
Install the
(4) M10 X 30mm
hex bolts (#
10
) into the threaded holes
of the main axle adapter (#
3
) as illustrated.
2)
Position and fasten the main axle adapter (#
3
) onto the hub of
the vehicle using the original wheel nuts. Apply the tightening
torque specified in your ATV owner’s manual.
3)
Position and fasten the Track Kit to the main axle adapter (#
3
)
using the
(4) M10
wheel nuts (#
16
).
Torque to 25 ft-lbs.
NOTE :
Recheck torque of the wheel nuts (#16) after
one hour of use.
4)
Repeat
steps 1
to
3
for the opposite side.
sketch H
sketch I
sketch J
8/11
